|
|
| Results 1-48 of 117 |  | 1 | 2 | 3 |  |
|
|
| |
|
Lift & Turn Compression
|
|
|
|
|
|
This latch has quickly grown to be one of the most demanded latches in the industry.
- The latch cam compresses against the panel when
the latch is closed ensuring a tight and rattle free installation.
- 316 stainless steel
- Superior GEMLUX® Finish
- Single, round-hole installation
- Over 40 customizable component combinations
- Use the diagram and chart to choose your latch
|
|
| Shaft Length |
Cutout Size |
Lockable |
Backing Plate |
Cam |
| Type |
AA# |
Type |
BB# |
Type |
CC# |
Type |
C# |
Length/Offset |
E# |
| Std. 2.75" |
40 |
2" |
24 |
No |
11 |
Thick |
1 |
Short/High |
1 |
| Ext. 3.25" |
41 |
2.5" |
30 |
Yes |
13 |
Thin |
2 |
Short/Med |
2 |
| Ext. 4.5" |
42 |
|
Flat |
3 |
Short/Straight |
3 |
See the details below on how to use this
chart to determine the part number of the
Lift & Turn Compression Latch for you!
|
Long/High |
4 |
| Long/Med |
5 |
| Long/Straight |
6 |
| Med/High HD |
7* |
| Med/High |
8* |
| Med/Straight |
9* |
*Medium Length Cams are only available on the 2.5" cutout size latches. |
A) Shaft Length
B) Latch cutout size
C) Locking or Non-locking
D) Backing Plate Thickness
E) Cam Length & Offset |
These parts follow an easy-to-use format: AABB-CCDE
| Shaft Length |
Cutout Size |
|
Lockable |
Backing
Plate |
Cam
Length/Offset |
| AA |
BB |
- |
CC |
D |
E |
Identify which components you want and using the numbering chart above replace the A, B, C, & D digits of the format to make your part number. |
If you wanted a 2.5" cutout, locking latch, thick backing plate, and a long/straight cam you would use the following:
| 2.75" Shaft |
2.5" Cutout |
|
Locking |
Thick |
Long/Straight |
| 40 |
30 |
- |
13 |
1 |
6 |
Your part number is: 4030-1316 |
|
|
|
Sort Items:
|
|
|
Sort Items:
|
|
| |
|
| Results 1-48 of 117 |  | 1 | 2 | 3 |  |
|
|
|
|